75mm XT60 2-Pin Male to Open-End Power Cable

Dual XT60 2-Pin Male to Open End Cable

This short power cable combines two XT60 2-pin male connectors in a single overmolded housing with an open wire end on the opposite side. The listed configuration uses a 75mm black lead, making it a practical option for equipment where the power interface and internal wiring point are positioned close together.

Instead of using two separate connector leads, both XT60 interfaces are integrated into one molded connector body. This keeps the connector side compact and gives the assembly a cleaner mechanical structure when two XT60 connection points need to be placed together.

The opposite end remains open, with red and black conductors available for further soldering, terminal connection or integration into another harness. As part of Goochain's custom cable assembly solutions , connector layout, wire specification, cable length and open-end preparation can be adjusted around the actual equipment design.

Two XT60 Connections in One Compact Assembly

The most distinctive feature of this cable is the connector arrangement. Two XT60 2-pin male interfaces are positioned side by side inside a common black overmolded housing instead of being supplied as two separate loose connectors.

For equipment designers, this can simplify the connector area when two DC power interfaces need to remain close together. The molded structure keeps the two connectors in a fixed relative position and creates a single cable exit from the rear of the housing.

The exact mating arrangement should still be checked against the customer's equipment before production. Connector spacing, orientation and the surrounding enclosure must allow both XT60 interfaces to mate correctly without interference.

Product Configuration

Electrical rating, wire gauge, conductor construction, stripping length and other electrical details should be confirmed according to the approved project specification before production.

Why Use a 75mm Short Power Lead?

A short lead can be more practical than a long cable when the XT60 connection point is located close to the PCB, battery module, terminal block or internal power distribution point. Excess cable inside a compact enclosure can make routing more difficult and may require additional fixing space.

With a listed length of 75mm, this cable is intended for short-distance power integration where the wiring path is already clearly defined. The compact length also makes it useful during equipment prototyping, test fixture construction and custom internal assembly.

Cable length should still be selected from the actual installation route rather than copied from a standard configuration. Goochain can adjust the lead length when the distance between the connector interface and termination point changes.

Open Wire End for the Next Assembly Step

The open cable end is useful when the final equipment does not use another standardized connector. Instead, the red and black conductors can continue directly into the customer's own electrical assembly.

Depending on the project, the open end may be prepared for PCB soldering, screw-terminal connection, crimp terminal installation or integration into a larger wiring harness. The final stripping and conductor preparation should be specified according to the customer's assembly process.

This avoids adding an unnecessary second connector and leaves the equipment manufacturer more freedom to determine how the cable is terminated inside the final product.

Typical Equipment Integration

This dual XT60 cable can be considered for projects where a compact power interface must connect to internal equipment wiring over a short distance. Possible applications include battery-related assemblies, power distribution modules, test equipment, prototype electronics and other custom DC power connection systems.

For projects that use other connector families, terminal structures or equipment-side interfaces, Goochain also develops custom industrial cable solutions for power distribution, equipment wiring and custom electronic assemblies.

Application suitability should always be confirmed from the actual electrical load, cable specification, mating connector and equipment layout. The XT60 connector shape alone does not define the allowable current or the electrical rating of the complete cable assembly.

Custom Options for OEM Projects

The 75mm black version shown on this page is one configuration rather than a fixed universal specification. For OEM projects, the cable can be developed around the actual installation space, current path and assembly process.

Typical customization items include:

• Cable length
• Wire gauge and conductor structure
• Cable and inner conductor colors
• Open-end stripping length
• Bare, stripped or tinned wire preparation
• XT60 connector arrangement and orientation
• Overmold dimensions and cable exit structure
• Additional terminals or connectors on the open end
• Labels and product identification
• Prototype and production packaging

Providing the mating interface, wiring requirement and installation drawing before sampling helps reduce dimensional and assembly issues during development.

From Prototype to Production

Even a short power lead has several details that need to be controlled before mass production. The spacing and orientation of the two XT60 connectors, the overmold structure, cable length and open-end preparation all affect how easily the cable can be installed in the final equipment.

Goochain can review these details from customer drawings, existing samples, mating components or equipment photos before prototype production. Our cable manufacturing and quality control process includes incoming material inspection, in-process workmanship checks and final inspection according to the approved production specification.

Prototype samples can then be used to confirm connector mating, cable routing, mechanical fit and electrical function with the customer's actual equipment before repeat production.

Frequently Asked Questions

Does this cable have one or two XT60 connectors?

It has two XT60 2-pin male connectors positioned side by side in one common overmolded housing.

What is on the opposite end of the cable?

The opposite side is an open wire end with red and black conductors available for the customer's final termination or equipment integration.

Is the 75mm length customizable?

Yes. The listed version is 75mm, but cable length can be adjusted according to the actual routing distance and installation requirements.

Can the open wire end be pre-stripped or tinned?

Yes. The open end can be prepared according to the customer's assembly process, including specified stripping length or tinning when required.

Can a terminal or another connector be added to the open end?

Yes. The open end can be further developed with terminals, housings or another connector if the final equipment requires a fully terminated cable assembly.

What current can this cable carry?

The current capability should not be determined from the XT60 connector appearance alone. It depends on the selected wire gauge, conductor construction, connector components, temperature conditions and complete cable design. The required electrical load should be provided during project review.

What information should be provided for a custom quotation?

Useful information includes the required cable length, wire gauge, expected electrical load, XT60 mating arrangement, open-end treatment, installation drawing and estimated order quantity. A mating sample or equipment photo can also help confirm the mechanical structure.

Can Goochain make prototype samples before mass production?

Yes. Prototype production can be used to confirm the dual connector spacing, mating fit, cable routing, open-end preparation and electrical function before the final mass-production specification is released.