USB 3.0 Type-A Male to 12-Pin Pogo Pin Cable, 500mm Black

This 500 mm black cable connects a USB 3.0 Type-A male plug to a 12-contact Pogo Pin interface. It is a device-specific interconnect for OEM equipment that uses a dedicated contact arrangement at the equipment end.

Specify the 12-Contact Interface

The contact count defines the physical interface, while the wiring drawing defines what each contact does. Confirm the mating face, contact numbering, pitch and orientation before assigning power, ground, USB signals or other device circuits.

The USB-A plug follows the supplied USB 3.0 connector specification. The finished cable data rate depends on the wired signal paths, contact transition and connected hardware. Specify the required USB operation when requesting the assembly.

Plan the Cable Route

The nominal 500 mm length provides a defined starting point for the device layout. Confirm whether length is measured between connector faces, housing ends or another drawing datum. Review the cable exit and bend space around the installed equipment.

For a project using another interface or cable arrangement, the Custom Spring Loaded Pogo Pin Cables category provides the broader product range. Contact geometry and wiring still need to match the selected device.

If the project calls for higher data rates, Signal Integrity Design for USB 10Gbps Pogo Pin Connections explains the channel factors to review when preparing the specification.

Prepare the OEM Specification

Use the Factory & Quality page when reviewing Goochain’s manufacturing background, and define cable inspection and system checks in the purchase specification.

Send the mating connector drawing, 12-contact pin assignment, length datum, required power and data functions, cable routing photo and expected order quantity to Goochain Technology Co., Ltd.